The Underfloor Heating Cable X-Cable is suitable for providing energy-efficient indoor underfloor heating and can be installed under almost any floor coverings.It will be safe to use inboth dry and wet locations.The X-Cable heats up through the inner conductor. It cannot be cut in any situation because the length and the output of the constant wattage cable are determinated.The outside diameter of the X-CABLE is 5.0 mm and rated at 20w/m. It provide a reliable and effective underfloor heating system.
UTH-Cable Twin Conductor Underfloor Heating Cable can be used for ceramic tiles , natural stone and wooden floor etc. It's also suitable for either primary or secondary heat.
The heating cable are the ideal solution for those complicated floor areas where a mat is not suitable. The outside diameter of the UTH-CABLE PRO is only 2.0 mm. It is very thin and very easy for installation. The UTH Cables PRO are rated at 12W/m or 15W/m and supplied as a cable on a roll. Since it is a loose floor heating cable, there is no fixed cable space, you can change the wattage/sqm by adjusting the cable spacing within the range we suggest.
UFH-MAT is thickness of only 3.6mm enables underfloor heating installations into most quality two-part adhesive with a minimum increase in floor height. We can provide customized production services according to your needs. The diameter and material of the cable can be customized according to your requirements.
Underfloor Foil-mat is a floor heating system consists of two different components: Inner heating wire and outer aluminum packed cover.It is simple to install, the foil heater delivers a consistent and even heat distribution.It can also be installed under the floor finish in wet areas without the need for additional earth grids.
UFH- MAT PRO is safe for both dry and wet environments.They're fixed into an adhesive fabric mesh, making heating cable installation quick and easy. Also The mat thickness of only 2.0 mm enables underfloor heating installations into most quality two-part adhesive with a minimum increase in floor height.
UFH-MAT is safe for both dry and wet environments, the mat thickness of only 3.6mm enables underfloor heating installations into most quality two-part adhesive with a minimum increase in floor height. We can provide customized production services according to your needs. The diameter and material of the cable can be customized according to your requirements.
Outdoor Use Heating cable IS-Cable is a 7mm outdoor twin conductors’ constant wattage heating cable.It rated at 30w/m and has Fluoroplastic and XLPE double insulation.
Underfloor Aluminum Mat is a floor heating system consists of two different components: Inner heating wire and outer aluminum packed cover.It is simple to install, the foil heater delivers a consistent and even heat distribution.It can also be installed under the floor finish in wet areas without the need for additional earth grids.
X-Cable-Pro is designed to provide flexible heating options for both indoor floor heating and outdoor concrete frost protection.Since it is a loose floor heating cable, there is no fixed cable space. So you can change the wattage/sqm by adjusting the cable spacing.
Our Snow Melting Mat IS-MAT is a 7mm outdoor twin conductors’ constant wattage heating mat. It rated at 30w/m and has Fluoroplastic and XLPE double insulation.